192.168.l.l 192.168.l.254 - 192.168.1.254 Router Login Admin | Password list
 

192.168.l.254 - 192.168.l.254 Router Login

192.168.1.254 router login admin. 192.168.l.254 is an IP address used by the routers of certain models to identify themselves on the network.

The IP address 192.168.1.254 is a private IP address . This IP address that is often used by wireless routers or ADSL modems. A router is one of the most used networking devices, and every Router has its default IP address. It is either 192.168.1.1 or 192.168.0.1 or 192.168.0.1.1, etc. 192.168.1.254 is the main default IP address for many routers, among them 3Com, Alcatel, Thompson, 2Wire, Westel, Billion ADSL, Linksys SRW 2023 and 2024, Motorola Netopia (Cayman) and other equipment.

For D-Link, TP-Link, Netgear, Sitecom, Tenda and a few other router brands 192.168.1.254 is the default internal IP address set by the manufacturer. In general, the router of a network will always use the address 192.168.1.254 and then assign the remaining blocks to other computers. It represents the last real IP address in a range of 192.168.1.1-192.168.1.254. 192.168.1.255 is a broadcast address and thus it cannot be used by any device.

192.168.1.254 is an IP address used by routers of certain models to identify themselves on the network. One of the addresses in the "private network 16-bit block address space" reserved for use in private networks. This address space consists of 65,536 addresses, which are proven to be too much for small home networks. The typical home or small business network uses only a subset and allocates the range 192.168.1.0-192.168.1.255 for most routing networks.

192.168.1.255 is reserved for broadcast data transfers (sending data to all computers on the network). Therefore, 192.168.1.254 is the last available address in the range. 192.168.1.0 is reserved to identify the network and cannot be used. Therefore, if your router uses 192.168.1.254 as an IP address, you still have 253 addresses that you can use (192.168.1.1-192.168.1.253).

  • Certain models of Linksys Routers/Modems
  • Alcatel Routers
  • Westell DSL Routers
  • 3Com Routers/3Com Routers
  • Billion Routers/Billion Routers
  • Netopia Cayman Gateways

If you are trying to configure your modem or router, you need to make sure you know the IP address. The administrative interface for the modem / router is only available via this IP address.

Default User Name and Password

Most routers with an IP address of 192.168.1.254 use admin for the user name and admin as the password. Alcatel and Thomson modems use the Administrator as a user name and are blank as a password. OvisLink modems use a user name as the administrator and airlive as a password.

Finding Router IP Address

Windows 7, 8, 8.1 and 10, press Win + C, search > “cmd ” > Enter to open the command line. At the command prompt, type “ipconfig” and press Enter. You will see the IP address of your router at the bottom of the network you are currently connected to “Default Gateway” router IP address. 

192-168-1-1-Default-Gateway

Briefly:Go to the search bar, select “run” and type in “cmd” and once the command box opens type “ipco

Router Default Password List

Router IP Address


Copyright © 2019 192.168.l.l - All rights reserved. | Contact | Cookie and Privacy Policy